BFQPF - INTEX 8570
- MSDS: BFQPF
- Manufacturer: INTEX PRODUCTS INC
- Product Name: INTEX 8570
- National Stock Number: 8010-00-815-2970
Product Identification
Product ID:INTEX 8570
MSDS Date:01/01/1985
FSC:8010
NIIN:00-815-2970
MSDS Number: BFQPF
Responsible Party
Emergency Phone: 803-242-6152
Cage: 88304
Contractor
Telephone: 803-879-7100 OR 803-297-4246
Cage: 88304
Ingredients
METHYLENE CHLORIDE (DICHLOROMETHANE) (SARA III)
CAS: 75-09-2
RTECS: PA8050000
Fraction By Weight: 55%
OSHA PEL 500 PPM; Z-2
ACGIH TLV: 50 PPM, A2; 9394
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PETROLEUM DISTILLATES
Fraction By Weight: <1%
ACGIH TLV: 500 PPM
AMMONIA
Fraction By Weight: 1TO8%
ACGIH TLV: 50 PPM
SODIUM DODECYLBENZENE SULFONATE
RTECS: WA3650000
Fraction By Weight: 1TO5%
Hazards
Effects of Overexposure:DRY SKIN EYE IRRIT. XS INHAL: EYE AND
RESPIRATORY IRRITATION, DIZZINESS,NAUSEA,POSSIBLE UNCONSCIOUS
First Aid
First Aid:INHALE.REMOVE TO FRESH AIR, APPLY ARTIFICIAL RESPIRATION IF
NECESSARY. GET MEDICAL ATTENTION. EYE OR SKIN CONTACT:FLUSH WITH
WATER AND SEEK MEDICAL ATTENTION
Fire Fighting
Flash Point:NONE
Extinguishing Media:CO2 FOAM
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS
Accidental Release
Spill Release Procedures:ALLOW SOLVENT TO EVAPORATE. THEN FLUSH RESIDUE
INTO SANITARY SEWER AND MOP AREA DRY
Handling
Handling and Storage Precautions:STORE BELOW 105 F
Other Precautions:NORMAL SAFETY PRECAUTIONS FOR HANDLING ALKALINE
SOLVENT TYPE PAINT REMOVERS.
Exposure Controls
Respiratory Protection:CONFINED SPACE-SELF CONTAINED BREATHING APARATUS
OR CON/STER MASK
Ventilation:SUFFICIENT TO STAY BELOW TLV USE ADEQUATE VENTILATION
Protective Gloves:SAFETY GLOVES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:RUBBER APRON
Supplemental Safety and Health
Chemical Properties
HCC:B3
Boiling Pt:B.P. Text:105 F
Vapor Density:>1
Spec Gravity:1.05
Evaporation Rate & Reference:> N-BUTYL
Appearance and Odor:VISCOUS YELLOW LIQUID, AMMONIA ODOR
Percent Volatiles by Volume:70
Stability
Stability Indicator/Materials to Avoid:YES
PAINTED SURFACES-STRONG ACID AND ALKALIES.
Hazardous Decomposition Products:THERMAL DECOMP-CO AND OXIDES OF
NITROGEN AND SULFUR. PHOSGEN
Disposal
Waste Disposal Methods:IN ACCORDANCE/LOC REGULATIONS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.